Multitech MT5634ZPW-PCI Manuel du propriétaire télécharger pdf (Page 19)

MT5634ZPW-PCI

2 Installation

Install the MultiModemZPW-PCI into the

Computer

Installation of the MultiModemZPW-PCI requires you to open

your computer. Please consult the computer manual in addition

to the following instructions:

1. Turn off the computer and unplug it. Failure to do so may

result in damage to both the MultiModemZPW-PCI and the

computer. Do not turn the computer on until the instructions

tell you to do so.

2. Remove the cover from the computer as instructed in the

computer manual.

3. Select an empty PCI slot. Remove the expansion slot cover

and save the retaining screw.

4. Before handling the MultiModemZPW-PCI, discharge any

static in your body by touching a piece of grounded metal

such as a water faucet. Carefully remove the

MultiModemZPW-PCI from its anti-static bag, handling it

only by the mounting bracket and edges. Do not touch the

gold-plated connectors along the bottom edge.

5. Placing the MultiModemZPW-PCI directly above the PCI

slot, gently but firmly push it into the connector until the

card’s retaining bracket is flush against the computer

chassis.

6. With the screw you saved in step 3, fasten the retaining

bracket to the computer chassis.

7. Replace the cover of the computer.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 93 94

Pas de commentaire

Multitech MT5634ZPW-PCI Manuel du propriétaire Page 19