Multitech MT5600ZDX Guide de l'utilisateur télécharger pdf (Page 5)

Quick Start Guide

1. Connect the Modem to Your PC

Plug one end of the RS-232 serial cable into the RS-232 connector on

the modem, and plug the other end into a serial port connector on

your computer, such as COM1 or COM2. You supply the RS-232

cable.

2. Connect the Modem to the Phone Jack

Plug one end of the phone cable into the modems LINE jack and the

other end into a phone wall jack. The phone cable is included with

your modem.

Note: The LINE jack is not interchangeable with the PHONE jack. Do not

plug the phone into the LINE jack or the line cable into the PHONE jack.

3. (Optional) Connect the Modem to the Phone

For voice-only calls, plug a phone into the modems PHONE jack.

4. Connect the Modem to the AC Power Outlet

Plug the DC power transformer into an AC power outlet or power strip.

Plug the other end into the POWER jack on the modem. The DC

power transformer is included with your modem.

Note: Use only the DC power transformer supplied with the modem.

Use of any other transformer voids the warranty and can damage the

modem.

5. Power on Test

Test the modem by turning it on (an on-off switch is located on the

side panel). When you apply power, the modem performs a

diagnostic self-test. The 56 indicator lights, and if a terminal program

is running, the TR indicator also lights. If this does not happen, check

that the power switch is on, the power supply is solidly connected,

and the AC outlet is live. If these measures do not work, see the

chapter on Troubleshooting in the complete User Guide.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Multitech MT5600ZDX Guide de l'utilisateur Page 5