Multitech ISI4608 Spécifications télécharger pdf (Page 39)

Chapter 3 - Driver Installation

Normal ports (ttyM) are configured for dial-in connections. Callout ports

(cum) are used for dial-out connections.

To view busy I/O address space on your system, enter:

cat /proc/ioports

To view busy IRQs, enter:

cat /proc/interrupts

To load the driver manually, use insmod.

Example: To load two ISI cards configured with base I/O addresses 0x210

and 0x200 and IRQs 5 and 10, enter the following in the destination folder:

insmod isicom

ISIBase1=0x210

Irq1=5

ISIBase2=0x200

Irq2=10

To remove the driver manually, enter rmmod isicom. This removes the

driver only if no ISI ports are in use.

Removing the ISI Driver (Linux)

1. Type cd /usr/local. Press Enter.

2. Type rm -r ISICOM. Press Enter.

3. This will remove driver for all ISIHx cards in that Linux server.

4. Remove the isictl file by typing rm isictl in the /dev directory.

5. Remove all devices that start with ttyM1x, ttyM2x, ttyM3x and ttyM4x

in the /dev directory.

rm ttyM1* rm ttyM2*

rm ttyM3* rm ttyM4*

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

Pas de commentaire

Multitech ISI4608 Spécifications Page 39