Multitech MT2834BLR Guide de l'utilisateur télécharger pdf (Page 71)

Chapter 7 - BABT Requirements

7.1 Compliance with BABT Requirements

Approved for connection to telecommunications system specified in the

instructions for use subject to the conditions set out in them.

Warning: Interconnection directly, or by way of other apparatus, of ports

marked "SAFETY WARNING see instructions for use" with ports marked or

not so marked may produce hazardous conditions on the network. Advice

should be obtained from a competent engineer before such a connection is

made.

This apparatus has been approved for the use of the following facilities:

• Auto-calling

• Loop disconnect and MF dialing

• Phone number storage and retrieval by a predetermined code

• Operation in the absence of proceed indication

• Automatic storage of last number dialed

• Tone detection-busy

• Auto clear from the originating end

• DTR dialing

• Modem

• PBX timed break register recall

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 89 90

Pas de commentaire

Multitech MT2834BLR Guide de l'utilisateur Page 71