Multitech MultiVOIP GSM SIP-to-Cellular Gateways MVPGSM-2 Guide de l'utilisateur télécharger pdf (Page 14)

Multi-Tech Systems, Inc. MVPGSM 14

Chapter 3 – MultiVOIP Software

Introduction

Configuring software for your MultiVOIP GSM entails three tasks:

Loading the software onto the PC (this is “Software Installation” and is discussed in this chapter).

Setting values for telephony and IP parameters that will fit your system (details are in Chapter 4

Establishing “phonebooks” that contain the various dialing patterns for VOIP calls made to different locations (a

detailed discussion of this is found in Chapter 5

Installing the MultiVOIP GSM Software

The software loading procedure does not present every screen or option in the loading process. It is assumed

that someone with a thorough knowledge of Windows and the software loading process is performing the

installation.

1. Be sure that your MultiVOIP GSM has been properly cabled and that the power is turned on.

2. Insert the MultiVOIP GSM CD into your CD-ROM drive. The CD starts automatically. It may take a few

moments for the Multi-Tech CD installation window to display.

3. When the Multi-Tech Installation CD dialog box appears, click the Install Software button.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 126 127

Pas de commentaire

Multitech MultiVOIP GSM SIP-to-Cellular Gateways MVPGSM-2 Guide de l'utilisateur Page 14