Multitech CDMA Guide de l'utilisateur télécharger pdf (Page 30)

Chapter 4 – $ Prefix Commands

CDMA 1xEV-D0 AT Commands Reference Guide (Document S000482B) 30

$QCVAD= Sets or Reads the Mode for Answering Data

Calls

Syntax: AT$QCVAD=<n> (Set Command)

AT$QCVAD? (Read Command)

Description: $QCVAD= sets the mode for answering data calls with A (Answer) or auto answer via

S0=1.

$QCVAD? reads the mode for answering data calls with A (Answer) or auto answer via

S0=1.

Value Setting

0 OFF (answer as voice). Default.

1 Fax (Fax not supported) for next call, then revert to OFF (voice)*

2 Fax (Fax not supported )for all calls

3 Async data for next call, then revert to OFF (voice)*

4 Async data for all calls

*Reverting to voice happens at the first of these events:

• An incoming call arrives (answered or not)

• Ten minutes elapse without receiving a call

• The modem is reset (or power-cycled)

• The setting is changed by command

The CDMA network requires the call type to be negotiated before the call is answered.

This command sets the call negotiation the modem makes prior to answering.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 66 67

Pas de commentaire

Multitech CDMA Guide de l'utilisateur Page 30