Multitech FF110 Manuel d'utilisateur

FaxFinder® V.34 Fax Server Configuration Guide for Inter-Operation between FaxFinder Model FF110 and 3Com NBX PBX Systems

FaxFinder Configuration Guide: 3Com NBX PBX Systems Next we will setup the dial plan to route any DID number starting with 559x to *0009, which ro

FaxFinder Configuration Guide: 3Com NBX PBX Systems 11 15. Set the Dial Plan 4 digit DID and Auto Attendent table so digits that start with 559 r

FaxFinder Configuration Guide: 3Com NBX PBX Systems FaxFinder configuration 1. Set your PC Ethernet port to 192.168.2.2, open a web browser at 1

FaxFinder Configuration Guide: 3Com NBX PBX Systems 2. Administration a) Click on Administration, enter IP Address, Subnet Mask, default Gateway,

FaxFinder Configuration Guide: 3Com NBX PBX Systems 3. Click on Modem Configuration DID Modem1 • Max DID Digits to 4 • DID start to Wink • Clic

FaxFinder Configuration Guide: 3Com NBX PBX Systems 5. Click on Current Status: there should be no errors for email status and time server statu

FaxFinder Configuration Guide: 3Com NBX PBX Systems Verification Tests • Check Current Status web page on FaxFinder and confirm no errors for Mai

FaxFinder Configuration Guide: 3Com NBX PBX Systems 17 Testing Observations When the FaxFinder is authenticated to an SMTP and Time server and t

FaxFinder Configuration Guide: 3Com NBX PBX Systems 2 FaxFinder Configuration Guide Inter-Operation with 3Com NBX PBX Systems PN S000427B, Version

FaxFinder Configuration Guide: 3Com NBX PBX Systems Introduction This configuration guide includes setup information for 3COM PBX model NBX vs 6.0

FaxFinder Configuration Guide: 3Com NBX PBX Systems Configuration Details In this example, the last 4 digits in the DID numbers all start with 559

FaxFinder Configuration Guide: 3Com NBX PBX Systems 3. To setup the analog line port for FaxFinder parameters, click on PSTN Gateway Configurati

FaxFinder Configuration Guide: 3Com NBX PBX Systems 5. Change name to FF110 FaxFinder, or name of your choice, then click apply. 6. Click on A

FaxFinder Configuration Guide: 3Com NBX PBX Systems 7. Next we will create the route with extension list for the FF110 FaxFinder line port. Click

FaxFinder Configuration Guide: 3Com NBX PBX Systems 9. Add Extension list *0009 or next available number in your plan and enter name, then click

FaxFinder Configuration Guide: 3Com NBX PBX Systems 11. Add line port extension 7253 by placing a check mark to the left of it, “or your line port