Multitech MTCBA-C Guide de l'utilisateur télécharger pdf (Page 13)

MultiModem Wireless Modem with Ethernet Interface

Multi-Tech Systems, Inc. Quick Start Guide 13

Idle Time Out – Sets the amount of time the PPP link stays

active before disconnecting. Setting the value to zero causes

the link to stay active continuously.

Dial Number – Enter the dial number. This number connects

you to the Internet.

For GPRS and EDGE, the number is *99***1#.

For CDMA, the number is #777

APN – The APN (Access Point Name) is assigned by your

wireless service provider.

Init String – 5 modem initialization strings are allowed.

For GPRS & EDGE: Include the Access Point Name:

AT+CGDCONT=1,"IP","<APN>"

PPP Authentication

Authentication Type – Click the button corresponding to the

authentication protocol you want to use to negotiate with the

remote peer. PAP, CHAP, or PAP-CHAP.

Default = PAP-CHAP

User Name – Enter the PPP User Name (it authenticates the

remote peer).

Password – Enter the PPP Password (it authenticates the

remote peer).

Important Note About Submit and Save & Restart

Click the Submit button located at the bottom of most screens to

save any changes you make. Then you must click the Save &

Restart button in order for your settings to take effect. Save &

Restart does not have to be executed after each screen; you can

change and Submit several screens, and then click Save &

Restart. The Save & Restart button is located on the Menu bar.

1 2 ... 8 9 10 11 12 13 14 15 16

Pas de commentaire

Multitech MTCBA-C Guide de l'utilisateur Page 13