Multitech MTCBA-H3-EN3-P1 Guide de l'utilisateur télécharger pdf (Page 47)

Chapter 3 – Using the Web Management Software

47 Multi-Tech Systems, Inc. MultiModem rCell User Guide

General Configuration

DHCP (Dynamic Host Configuration Protocol) is a protocol that allows individual devices on an IP network to get

their own network configuration information (IP address, subnet mask, broadcast address, etc.) from a DHCP

server. The overall purpose of DHCP is to make it easier to administer a large network.

DHCP: Enable/disable the DHCP server.

Subnet: Enter the subnet address. If you want to change the DHCP subnet address, you first

have to delete all the subnet settings below.

Mask: Enter the subnet mask.

Gateway: Enter the gateway address.

DNS: Enter the DNS address.

Lease Time: Select the DHCP Lease Time from the selection box. Lease time is set in days, hours, and

minutes. A Lease Time of 00-00-00 is an Infinite Lease Time.

Subnet Settings

From-To Range: Enter the range of IP addresses to be assigned by Appendix A – Commonly Supported

Subnets Reference Table Subnets.

Click Add. The address range displays in the table at the bottom of the screen.

You can delete or edit the address range if necessary.

DHCP Server > Fixed Addresses

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 70 71

Pas de commentaire

Multitech MTCBA-H3-EN3-P1 Guide de l'utilisateur Page 47