Multitech CF220 Guide de l'utilisateur télécharger pdf (Page 4)

Multi-Tech Systems, Inc. CF220-DID CallFinder User Guide 4

Chapter 1 – Product Description and

Specifications

Product Description

The CallFinder

is a DID-to-analog telephony adapter. It brings analog DID services to a key telephone

system or PBX that is not DID-enabled. When equipped with the CallFinder, the phone system can route

incoming calls directly to end-user extensions. The CallFinder has two DID channels. Each channel is

connected to the telco DID line on one side and to the PBX/key system on the other side. A CallFinder

extension port can be connected either to a trunk port or to a station port on a PBX. The choice between

trunk port or station port connections depends on port availability, logging requirements, and/or on

whether it is necessary for incoming DID calls to be treated like outside calls instead of intra-PBX calls.

The CallFinder product consists of the hardware unit with pre-installed configuration software and

additional management software on a CD.

Product Features

• Direct routing of incoming calls to end-user extensions

• Two Direct Inward Dial (DID) ports

• Two extension ports programmable as FXS or FXO

• Extension ports also programmable as “FXS Pass Through” for inter-operation with Multi-

Tech FaxFinder fax servers

• DID ports support wink/delay-start, immediate-start, and reverse-on-disconnect service types

• Interfaces with most call-processing systems

• Supports audio ring back and busy pass-through

• Web interface for system configuration and management

• PC-based software to manage multiple CallFinders in same system

• Flash memory for easy updates

• Small footprint external chassis

• Two-year warranty

1 2 3 4 5 6 7 8 9 ... 75 76

Pas de commentaire

Multitech CF220 Guide de l'utilisateur Page 4