Multitech GFU19 Manuel d'utilisateur télécharger pdf (Page 72)

72RX1200

Setting up the Equipment

Detach a clip-on-

housing step-by-

step

Turn GHT56 over to gain access to the space for the clip-on-housing.

2. Place the clip-on-housing into position such that

• the guide rails on the GHT56 are aligned with the guide rails on the clip-

on-housing.

AND

• the LEMO port on the GHT56 is aligned with the connector on the clip-on-

housing.

3. Slide the clip-on-housing into position such that the connector is completely

plugged into the LEMO port. It clicks.

)

Do not turn the screw on the topside of the clip-on-housing. The clip-

on-housing is automatically fixed when completely plugged into

position.

Description

1. Press the small press clip next to the guide rail on the GHT56 to unlock the

clip-on-housing from the GHT56.

2. Slide the clip-on-housing away from the press clip until the connector is

completely unplugged from the LEMO port.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 209 210

Pas de commentaire

Multitech GFU19 Manuel d'utilisateur Page 72