Multitech MT5634ZBAV Guide de l'utilisateur télécharger pdf (Page 76)

User Guide

Command: +ES=

Enable Synchronous Buffered Mode

Values:

= 6

Default: None

Description: Allows an H.324 video application direct access

to the synchronous data channel. On underflow,

the modem sends HDLC flag idle (0x7E) to the

remote modem.·This special error control mode

is overridden by any of the following commands:

, or

AT+ES=? shows the only allowed value.

AT+ES? shows the current value.

Command: #CBA

Callback Attempts

Values:

= 1–255

Default: 4

Description: Sets the number of callback attempts that are

allowed after passwords have been exchanged

between modems.·

Command: #CBD

Callback Delay

Values:

= 0–255

Default: 15

Description: Sets the length of time (in seconds) that the mo-

dem waits before calling back the remote modem.

Command: #CBF? Callback Failed Attempts Display

Values: n/a

Default: n/a

Description: Requests the number of failed callback pass-

words since reset or power-up. This number can

be stored to nonvolatile memory using the

command.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 169 170

Pas de commentaire

Multitech MT5634ZBAV Guide de l'utilisateur Page 76