Multitech MTCMR-E1 Manuel d'utilisateur télécharger pdf (Page 34)

Chapter 4 – FTP AT Commands

34 Universal IP AT Commands Reference Guide

#FTPNETWORKTIMER – FTP Client Network Transmit Safety Timeout Value

Description: This parameter determines the inactivity time in seconds of the TCP TX buffer.

This command is for all devices except the SocketWireless Wi-Fi (MT810SWM-IP)

Syntax: AT#FTPNETWORKTIMER=<parameter1>

Values: 0-65535 – the time in seconds the client will wait for the TCP available TX buffer to be greater

than 0. A setting of 0 will disable the function.

Responses: \r\n#FTPNETWORKTIMER: VALUE1\r\n

\r\nOK\r\n

\r\nERROR\r\n

Example(s): send: AT#FTPNETWORKTIMER=100\r

reply: \r\nOK\r\n

send: AT#FTPNETWORKTIMER?\r

reply: \r\n#FTPNETWORKTIMER: 100\r\n

reply: \r\nOK\r\n

Display Command

#VFTP – Display FTP Parameters

Description: This command directs the TCP/IP stack to display all AT# parameters for the FTP client

configuration.

Syntax: AT#VFTP

Values: FTPSERV

FTPPORT

FTPUN

FTPPW

FTPGETFILENAME

FTPPUTFILENAME

FTPPUTPATH

FTPTYPE

FPTMODE

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 118 119

Pas de commentaire

Multitech MTCMR-E1 Manuel d'utilisateur Page 34