Multitech MTMC8-USB Guide de l'utilisateur télécharger pdf (Page 12)

HARDWARE AND INSTALLATION

Dimensions with brackets attached for rack mounting (top view)

Dimensions with brackets attached for rack mounting (front view)

Note:

Attaching the device to the rail of an EIA 19-inch rack enclosure may require two people.

1. Position a mounting bracket on the right side as shown.

2. Secure the bracket to right side using three provided screws as shown.

3. Position a mounting bracket on the left side.

4. Secure the bracket to left side using three provided screws.

5. Remove feet (4) from the unit.

6. Secure the unit to rack rails by the brackets and mount the MTMC 8/16 in the rack enclosure per the rack

manufacturer's mounting procedure. Because equipment racks vary, screws for rack-rail mounting are not

provided. Follow the instructions of the rack manufacturer and use screws that fit.

Cabling your Device to a Computer

To cable the device:

1. Connect the power cord to an outlet or power strip and to the power adapter.

2. Connect the power adapter to the 9V connector on the MTMC.

12 MultiModem

USB MTMC8-USB/MTMC16-USB User Guide

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

Pas de commentaire

Multitech MTMC8-USB Guide de l'utilisateur Page 12