Multitech MTPSR3-200 Guide de l'utilisateur télécharger pdf (Page 55)

Chapter 5 - Client Setup

MTPSR3-200 55

5. Select TCP/IP, then click Properties to open the TCP/IP Properties window.

6. Select the IP Address tab.

The IP addressing method depends on how your ProxyServer’s DHCP Server option was

configured. If DHCP Server is active, your IP address is issued automatically. If your network

administrator did NOT activate DHCP Services on the ProxyServer, you will have to assign your

IP address manually.

Verify the ProxyServer/DHCP status with your network administrator, then proceed to step 7 for

DHCP assigned addressing, or to step 8 for manual addressing.

7. If DHCP Services are active on the ProxyServer (default), verify that the Obtain an IP address

automatically option is selected. You are done; go to step 17 to reboot your PC and attempt to

open an Internet session.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 129 130

Pas de commentaire

Multitech MTPSR3-200 Guide de l'utilisateur Page 55