Multitech MultiModem rCell Guide de l'utilisateur télécharger pdf (Page 34)

Chapter 3 – Using the Web Management Software

34 Multi-Tech Systems, Inc. MultiModem rCell User Guide

33BNetworks & Services

87BNetworks & Services > Network Configuration

Networks or Hosts can be added here. The options to Delete or Edit a network after it has been defined and added are available

by using the table at the bottom of the screen.

Network Configuration

Enter the Name, IP Address, and Mask for a new Network or Host.

Notes:

● A Network/Host Name cannot be edited.

● A Network/Host cannot be deleted if it is used in another configuration.

● Network/Host changes are reflected in all the configurations in the Web Management software where they are

used.

● A Network/Host added here will be displayed in the following sections: Static Routes, DNAT, and Packet Filters.

Name: Enter the name of the Network/Host. The same address-mask pair should not already be present

in the displayed list. The Name is limited to 15 characters maximum.

IP Address: Enter the IP Address of the Network/Host. The same address-mask pair should not already be

present in the displayed list.

Subnet Mask: Enter the Network Mask of the Network/Host. For Host addresses, the mask is entered as 32.

Note: See Appendix A -- Table of Commonly Supported Subnets.

Add Button: Click the Add button. The defined network is added and will display at the bottom of the screen.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 66 67

Pas de commentaire

Multitech MultiModem rCell Guide de l'utilisateur Page 34