Multitech RF825-E-AP Guide de l'utilisateur télécharger pdf (Page 5)

Quick Start Guide RouteFinder RF825 Series

CDMA & EDGE Back Panel

CDMA-AP & EDGE-AP Back Panel

Connecto

Description

GSM/EDGE

Antenna

Connector

2 dBi cellular antenna connector.

Note: The antenna must be attached in order for the

RouteFinder to be operational.

Handset

Connector for a handset.

WAN

WAN (10/100BaseT) port connects the DSL modem or

cable modem.

LAN Ports

There are 4 LAN ports. You can connect to PCs, FTP

servers, printers, or other devices you want to put on

your network.

+9 Volt to

32VDC

RouteFinder power source can range from 9 volts to

32VDC.

Reset

The Reset button resets the RouteFinder to its factory

defaults. Press and hold the button until the Status LED

blinks, and then release it. Do not press this button

unless you want to restore all settings to the factory

defaults.

802.11

2.4 GHz 5dBi SWI-Reverse-F antenna connector.

Note: The antenna must be attached in order for the

RouteFinder to be operational.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

Multitech RF825-E-AP Guide de l'utilisateur Page 5