Multitech RF802USB Guide de l'utilisateur télécharger pdf (Page 42)

Chapter – Networking Basics

Multi-Tech Systems, Inc. Wireless Network Adapter User Guide 42

Configuring a Dynamic IP Address

When the drivers were installed, the default for the IP Address was set to obtain IP

dynamically through a DHCP server.

If you need to check or change the settings, complete the following steps:

1. Select Start > Settings > Control Panel.

2. Double-click on Network.

3. The Network dialog box displays. Highlight TCP/IP for USB 11Mbps Wireless

Network, and then click the Properties button.

Note: If TCP/IP is not present see the section on How to Install TCP/IP.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 57 58

Pas de commentaire

Multitech RF802USB Guide de l'utilisateur Page 42