Multitech MULTI MODEM II MT5600BA Manuel d'utilisateur télécharger pdf (Page 12)

2 Installation

MultiModemII User Guide

Introduction

This chapter shows you step-by-step how to set up your Multi-Tech MultiModemII,

check it out, and make your first calls.

What You Will Need

Before starting, please make sure you have everything you need:

We supply

An MT5600BA or MT5600BL modem

A power transformer

Country-specific telephone cordage

A 9-pin to 25-pin serial cable (international modem kits only)

A printed Quick Start Guide

An installation CD containing modem drivers and this User Guide

A CD containing data communications and other programs

You supply

A computer with an unused serial port

A shielded RS-232 serial cable with a male DB-25 connector on one end and a

connector to match your computer’s serial port on the other end (North America

only)

A nearby AC power outlet

A nearby telephone line jack

A nearby leased line jack or terminals (optional)

Safety Warnings

• Use this product only with UL- and CUL-listed computers.

• To reduce the risk of fire, use only 26 AWG or larger telephone wiring.

• Never install telephone wiring during a lightning storm.

• Never install a telephone jack in a wet location unless the jack is specifically de-

signed for wet locations.

• Never touch uninsulated telephone wires or terminals unless the telephone line

has been disconnected at the network interface.

• Use caution when installing or modifying telephone lines.

• Avoid using a telephone (other than a cordless type) during an electrical storm;

there is a risk of electrical shock from lightning.

• Do not use a telephone in the vicinity of a gas leak.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 112 113

Pas de commentaire

Multitech MULTI MODEM II MT5600BA Manuel d'utilisateur Page 12