Multitech MULTI MODEM II MT5600BA Manuel d'utilisateur télécharger pdf (Page 13)

2 Installation

MultiModemII User Guide

Step 1: Connect the Modem to Your System

Turn off your computer. Placing the modem in a convenient location, connect it

to your computer’s serial port, to the telephone line, to your leased line, to AC power,

and, optionally, to your telephone.

VOLUME

EIA RS232C

LEASEDLINE

POWER

PHONE

Figure 2-1. MT5600BL connections.

RS232 Connection

Plug one end of the serial cable into the RS232 connector on the modem, and the oth-

er end into a serial port connector on your computer, such as COM1 or COM2.

Dialup Connection

Plug one end of the modular phone cable into the modem’s LINE jack, and the other

end into a public switched telephone network (PSTN) wall jack.

Note: The LINE jack is not interchangeable with the PHONE jack. Do not plug the

phone into the LINE jack or the line cable into the PHONE jack.

Note: Regulatory agencies may impose certain restrictions on equipment connected

to public telephone systems. For more information, see Appendix A.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 112 113

Pas de commentaire

Multitech MULTI MODEM II MT5600BA Manuel d'utilisateur Page 13