Multitech RF825-C-NX-AP Manuel d'utilisateur télécharger pdf (Page 11)

Chapter 1 – Non-NAT Setup Examples

Multi-Tech Systems, Inc. RF825 Series IPSec VPN Setup Examples – A Reference Guide (S000440B) 11

Step 2 for Side A – Packet Filters

1. Go to the Packet Filters screen to setup another network across the VPN tunnel with the

rights to access across the tunnel

2. Click on From (Host/Networks) and select the network you are allowing. Example: ANY.

Note that you should already have the LAN Any Any Accept listed.

3. If you are not restricting the type of service, select Any for the To (Host/Network).

4. Click the Add button to add the Packet Filter rule.

Important Note: Do not

check the Status box. When adding a user-defined rule, leave the

Status box unchecked.

Step 3 for Side A –VPN Setup

1. Go to the VPN > IPSec screen.

2. Click the VPN Status check box to enable IPSec. Then click the Save button.

3. Select Add an IKE Connection by clicking the corresponding Add button.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 32 33

Pas de commentaire

Multitech RF825-C-NX-AP Manuel d'utilisateur Page 11