Multitech RF825-C-NX-AP Manuel d'utilisateur télécharger pdf (Page 5)

Chapter 1 – Non-NAT Setup Examples

Multi-Tech Systems, Inc. RF825 Series IPSec VPN Setup Examples – A Reference Guide (S000440B) 5

Prerequisite Step 2 – Phase 2 Setup

1. Start Phase 2 by right clicking on the name of your VPN Client you created in Phase 1.

2. The VPN Client address will be set to 0.0.0.0 unless you have a Static IP address (e.g.,

65.126.90.250).

3. The Address type is the type of setup on the host side. If it’s a network, then choose

Subnet address from the drop down list box and enter in the Remote LAN address

(e.g., 192.168.25.0) and the Subnet Mask (e.g., 255.255.255.0). If it’s a single IP

address, change it to that address.

4. For ESP Authentication choose MD5.

1 2 3 4 5 6 7 8 9 10 ... 32 33

Pas de commentaire

Multitech RF825-C-NX-AP Manuel d'utilisateur Page 5