Multitech IPC-623C Guide de l'utilisateur télécharger pdf (Page 71)

CommPlete Series 4000 Server SBC, Model IPC-623C 71

Award BIOS Setup

IDE Primary Master/Slave UDMA

IDE Secondary Master/Slave UDMA

UDMA, also known as Ultra DMA, is a DMA data transfer

protocol that utilizes ATA commands and the ATA bus to allow

DMA commands to transfer data at a maximum burst rate of 33

MB/s. When you select Auto in the four IDE UDMA fields, the

system automatically determines the optimal data transfer rate

for each IDE device.

On-Chip Primary PCI IDE

On-Chip Secondary PCI IDE

This Integrated peripheral controller contains an IDE interface

with support for two IDE channels. Select Enabled to activate

each channel separately.

Onboard PCI SCSI Chip

Select Enabled if your system contains a built-in SCSI

controller.

USB Keyboard Support

Select Enabled if you have a USB Keyboard.

Init Display First

Initialize the AGP video display before initializing any other

display device on the system. Thus the AGP display becomes

the primary display.

Onboard FDC Controller

Select Enabled unless you installed an add-in FDC.

Onboard UART1

Select a logical COM port name and matching address for the

first and second serial ports. Select an address and

corresponding interrupt for the first and second serial ports.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 86 87

Pas de commentaire

Multitech IPC-623C Guide de l'utilisateur Page 71