Multitech MVPFXS-24 Guide de l'utilisateur télécharger pdf (Page 55)

MultiVOIP FXS User Guide Technical Configuration

Configuration by Web GUI

This manual primarily describes configuration of the MultiVOIP with the web GUI.

Pre-Requisites

To complete the configuration of the

MultiVOIP unit, you must know several

things about the overall system.

Before configuring your MultiVOIP Gateway unit, you must know the values for several IP and telephone

parameters that describe the IP network system and telephony system (PBX or telco central office

equipment) with which the digital MultiVOIP will interact. A summary of this configuration information

appears on page 56 (“Config Info CheckList”).

IP Parameters

The following parameters must be known about the network (LAN, WAN, Internet, etc.) to which the

MultiVOIP will connect:



Ask your computer network

administrator.

Info needed to operate:

all MultiVOIP models.

IP Network Parameters:

Record for each VOIP Site

in System

• IP Address

• IP Mask

• Gateway

• Domain Name Server (DNS) Info

Write down the values for these IP parameters. You will need to enter these values in the “IP Parameters”

screen in the Configuration section of the MultiVOIP software. You must have this IP information about

every VOIP in the system.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 164 165

Pas de commentaire

Multitech MVPFXS-24 Guide de l'utilisateur Page 55