Multitech RF760 Guide de l'utilisateur télécharger pdf (Page 87)

Chapter 6 – RouteFinder Software

Multi-Tech Systems, Inc. RouteFinderVPN RF760/660/600VPN User Guide (PN S000323D) 87

Network Setup > PPPoE

PPPoE (Point-to-Point Protocol over Ethernet) is a specification for connecting multiple computer users on an Ethernet local

area network to a remote site through DSL or cable modems or similar devices. PPPoE can be used to have an office or

building-full of users share a common Digital Subscriber Line (DSL), cable modem, or wireless connection to the internet.

PPPoE combines the Point-to-Point (PPP), commonly used in dialup connections, with the Ethernet protocol which support

multiple users in a local area network.

Important: If DHCP client is enabled, the PPPoE cannot be used. The internet connection can be either PPPoE or DHCP

client at any given time.

PPPoE on WAN

Enable PPPoE on WAN

To Enable PPPoE on WAN, check the corresponding box. This will enable the interface connected to the

ADSL modem (this will be the interface to the internet).

User Name

This field defines the ADSL User Name given by the ISP.

Password

The user’s password must be entered in this field.

DNS Address from Peer

Check this box if you want to obtain DNS server addresses from the peer (i.e., the ISP).

Save

Click Save to activate these settings.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 188 189

Pas de commentaire

Multitech RF760 Guide de l'utilisateur Page 87