Multitech RF825-E-AP Guide de l'utilisateur télécharger pdf (Page 12)

Chapter 1 – Introduction and Product Description

Multi-Tech Systems, Inc. RouteFinder RF825/RF825-AP User Guide (Document Number S000422B) 12

CDMA & EDGE Back Panel

CDMA-AP & EDGE-AP Back Panel

Back Panel Connectors

Connector Description

GSM/CDMA Antenna

Connector

Connector for the 2 dbi cellular antenna.

Note: The antenna must be attached in order for the RouteFinder to be operational.

Handset

Connector for a handset.

WAN

The WAN (10/100BaseT) port connects the DSL modem or cable modem.

LAN Ports

There are 4 LAN ports. You can connect to PCs, FTP servers, printers, or other

devices you want to put on your network.

+9 Volt to 32VDC

RouteFinder power source can range from 9 volts to 32VDC.

Reset

The Reset button resets the RouteFinder to its factory defaults. Press and hold the

Reset button until the Status LED blinks, and then release it. Do not press this

button unless you want to restore all settings to the factory defaults.

802.11

2.4 GHz 5dBi SWI-Reverse-F antenna connector.

Note: the antenna must be attached in order for the AP to be operational.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 103 104

Pas de commentaire

Multitech RF825-E-AP Guide de l'utilisateur Page 12