Multitech SF100-G-EU Spécifications télécharger pdf (Page 19)

Chapter 2 – Getting Started

19 MultiModem® iSMS Administrator’s Guide

Establishing TCP/IP Communication

Use an IP enabled workstation with an Internet browser to setup and manage the MultiModem iSMS.

Your workstation needs to be configured with a 192.168.2.x IP address and subnet mask of 255.255.255.000, to be able to

communicate with a new (or factory defaulted) MultiModem iSMS (where x is not the number 0, 1, or 255, nor any other

host number that may already be in use by another computer or device on the 192.168.2.x subnet).

Note: When configuring your workstation with a 192.168.2.x IP address (either as an alias address or as the primary fixed

address) and when the workstation is not separated by a router or firewall from the MultiModem iSMS (that is, the units

are on the same local network), the workstation does not need to be configured with a default gateway address (default

route).

This section describes how to setup a Windows XP workstation so it can communicate with the MultiModem iSMS.

Setting a Fixed IP Address

1. Make the MultiModem iSMS connections.

2. From the Start menu, select Settings then Control Panel.

3. In the control panel, double-click Network Connections. The Network Connections window opens. .

4. Right click the Local Area Connection icon and select Properties from the drop down list.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 125 126

Pas de commentaire

Multitech SF100-G-EU Spécifications Page 19