Multitech MTCMR-H Guide de l'utilisateur télécharger pdf (Page 79)

Chapter 3 – Supported GSM/WCDMA AT Commands

High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A) 79

+CSDH Show Text Mode Parameters

Description: This command gives additional information about text mode result codes. This information

can be found in the description of the +CMT, +CMGR, +CMGL commands and responses.

Syntax:

Command Responses

Action Command:

AT+CSDH=<n>

Read Command:

AT+CSDH?

+CSDH: <n>

Test Command:

AT+CSDH=?

+CSDH: (list of supported

<n>s)

Values: <n> Show Text Mode

0 Do not show header values. Default

1 Show the values in result codes

Parameter Storage: The parameter <n> is stored using AT&W. The default value can be restored using

AT&F.

Examples:

Command Responses

AT+CSDH=0

Note: Set value to “do not show”

AT+CSDH?

Note: Current value

+CSDH: 0

Note: Do not show header

values

AT+CSDH=? +CSDH: (0,1)

+CSMP Set Text Mode Parameters

Description: This command selects values for <vp>, <pid>, and <dcs> and configures the text mode.

Syntax:

Command Responses

Action Command:

AT+CSMP=<fo>, <vp>, <pid>,<dcs>

Read Command:

AT+ SMP?

+CSMP: <fo>, <vp>, <pid>,<dcs>

No Test Command

Values: <fo> The <fo> byte comprises 6 fields:

b7 b6 b5 b4 b3 b2 b1 b0

RP UDHI SRR VPF RD MTI

RP Reply Path, not used in text mode.

UDHI User Data Header Information.

b6=1 if the beginning of the User Data field contains a Header in

addition to the short message. This option is not supported in +CSMP

command, but can be used in PDU mode (+CMGS).

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 146 147

Commentaires sur ces manuels

Pas de commentaire

Multitech MTCMR-H Guide de l'utilisateur Page 79

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Multitech MTCMR-H