Multitech RF102S Guide de l'utilisateur télécharger pdf (Page 61)

Chapter 6 - RouteFinder Monitor

Status Tab

The Status tab provides information about the status of the Serial ports.

1. From the RouteFinder Monitor dialog box, click the Status tab.

2. The Status tab information displays:

WAN Ethernet

This indicator light shows that either the IP Routing or the Remote Access function is in use.

Async Port

Modem Power:

The indicator light is lit when the modem power is turned on.

Modem Ready

The Network Device sends a pre-initialization and initialization command to the modem or ISDN

TA. If this communication is successful, the indicator light will be lit, indicating your modem is

ready to make a connection.

Modem Connected

If the Network Device has detected that your modem has successfully dialed up a connection to

a remote site, the indicator light will be lit.

PPP Connected

After a connection is established, if the RouteFinder has detected that the PPP connection is

successful, this indicator light will be lit.

3. To exit RouteFinder Monitor, close the window.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 113 114

Pas de commentaire

Multitech RF102S Guide de l'utilisateur Page 61