Multitech RF102S Guide de l'utilisateur télécharger pdf (Page 73)

Chapter 7 - LAN Client Settings

Adding IPX/SPX (Novell Server Connection):

Windows 95/98:

1. In the Network dialog box, Configuration tab, click Add. The Select Network Component

Type dialog box opens.

2. Select Protocol and click Add. The Select Network Protocol dialog box opens.

3. In the Manufacturers option box, select Microsoft. In the Network Protocols option box, select

IPX/SPX-compatible Protocol.

4. Click OK (twice) to return to, and then close, the Network dialog box.

Windows NT:

Note: NWLink IPX/SPX Compatible Transport is probably already installed, along with NWLink

NetBIOS and TCP/IP Protocol; however, if NWLink IPX/SPX Compatible Transport does not

appear on the Protocols tab of the Network dialog box, perform the following steps:

1. In the Network dialog box, Protocol tab, click Add. The Select Network Protocol dialog box

opens.

2. Select NWLink IPX/SPX Compatible Transport , then click OK.

3. Click Close to close the Network dialog box and return to the Desktop.

Adding Client for NetWare Networks (Novell Server Connection):

Windows 95/98:

1. In the Network dialog box, Configuration tab, click Add.

2. Select Network Client and click Add.

3. The Select Network Client dialog box displays. In the Manufacturer’s option box, select

Microsoft. In the Network Clients option box, select Client for NetWare Networks.

4. Click OK to add this Client and return to the Network dialog box.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 113 114

Pas de commentaire

Multitech RF102S Guide de l'utilisateur Page 73