Multitech RF560VPN Manuel d'utilisateur télécharger pdf (Page 35)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 35

11. Select Static IP Settings and enter the following information.

IP Assigned by your ISP: This is the IP address of the WAN port on the RF550VPN/RF560VPN

at Site B.

(Ex: 192.168.0.2)

IP Subnet Mask: This is the IP address of the subnet mask for the WAN port on the

RF550VPN/RF560VPN at Site B. (Ex: 255.255.255.0)

c) IP Gateway Address: This is the IP address of the LAN port on the RF500S NAT Box at Site B.

(Ex: 192.168.0.1)

Click the Next button.

Note: For this scenario of connecting two RouteFinders back-to-back it is not necessary to enter any

information for the ISP Additional Settings or Modem Settings.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 41 42

Pas de commentaire

Multitech RF560VPN Manuel d'utilisateur Page 35