Multitech RF560VPN Manuel d'utilisateur télécharger pdf (Page 11)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 11

j) Network Interface: Select the Network Interface from the drop-down list box.

Example: WAN ETHERNET

k) Secure Association: Select IKE (the default) to set how inbound packets will be filtered. IKE

primarily encompasses router key exchange and the negotiation of security policy. Selecting

IKE will cause the following fields to display.

▪ Perfect Forward Secure: Check Enabled

▪ Encryption Protocol: Select the encryption protocol used for your configuration. The

default protocol for the RF550VPN/RF560VPN communicating with another

RF550VPN/RF560VPN is 3DES.

▪ Preshared Key: Enter the PreShared Key name. You can enter an alphanumeric name,

(Ex. 1o2t3t4f), but it must match the security code for the RouteFinder at Site B.

▪ Key Life: Enter the amount of time that tells the router to renegotiate the Key. For example

3600 seconds is 60 minutes

▪ IKE Life Time: Enter the amount of time that tells the router to renegotiate the IKE security

association. For example 28800 seconds is 8 hours.

15. Once the VPN settings are entered, click the Save button. The data will be displayed on the VPN

Settings screen where you can enable/disable, edit, or delete this connection:

Note: If you uncheck the Enable box on this screen, the information will remain for you to

enable/disable, edit, or delete at any time you desire.

For the RF560VPN:

From the VPN Settings drop-down list box, select the type of VPN Connection you want to set:

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 41 42

Pas de commentaire

Multitech RF560VPN Manuel d'utilisateur Page 11