Multitech RF560VPN Manuel d'utilisateur télécharger pdf (Page 41)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 41

Testing Your Configuration

You can test your connection between the two RouteFinders using the PING command at a DOS prompt.

If a dynamic IP address is used to access the Internet at Site B, the PING will need to originate from Site

B first before Site A can generate a successful PING directed at Site B.

At the Site B workstation connected to a LAN port of the RF550VPN/RF560VPN:

At the DOS prompt PING the LAN port of the RF500S NAT Box at Site B.

Example: PING 92.168.0.1 <return>

You should see four successful packet transmit/receive statements. If you do not, try several

more times. You may see several initial failures while the two devices make a connection.

If this is successful, try to PING the WAN port of the RF500S NAT Box at Site B.

Example: Ping 204.26.122.3

You should see four successful packet transmit/receive statements. If you do not, try several

more times. You may see several initial failures while the two devices make a connection.

If this is successful, try to PING the WAN port of the RF550VPN/RF560VPN at Site A.

Example: Ping 204.26.122.103

You should see four successful packet transmit/receive statements. If you do not, try several

more times. You may see several initial failures while the two RouteFinders make a secure

connection

1 2 ... 36 37 38 39 40 41 42

Pas de commentaire

Multitech RF560VPN Manuel d'utilisateur Page 41