Multitech MTCBA-G-F2 Manuel d'utilisateur télécharger pdf (Page 19)

Chapter 3 – SMTP/POP3 Email Services

Multi-Tech Systems, Inc. AT Commands for Wireless Modems with IP Connectivity (S000333D) 19

#POP3HEADERMODE Send/Do Not Send POP3 Header

Definition: When receiving an email message, the TCP/IP stack can be configured to send or not to send the

POP3 header over the serial port. The POP3 header contains the From, Cc and Subject fields.

Values: 0 The email header will not be sent over the serial port while retrieving.

1 The email header will be sent over the serial port while retrieving. Default.

Syntax: Set Value: AT#POP3HEADERMODE=<value>

Get Value: AT#POP3HEADERMODE? or AT#VPOP3, AT#VALL

#POP3PORT Set POP3 Server

Definition: To reach the POP3 server, the TCP/IP stack software must know the port of the POP3 server used for

retrieving email.

Note: This parameter should be changed only by your network administrator since it depends on

network infrastructure configuration including firewalls, proxy or specific TCP port translation settings.

Values: 5 digits (each digit between 0 and 9 inclusive). Note that numbers above 65,535 are illegal as the port

identification fields are 16 bits long in the TCP header. Default 110.

Syntax: Set Value: AT#POP3PORT=<value>

Get Value: AT#POP3PPORT? or AT#VPOP3, AT#VALL

#POP3PW Set POP3 Password

Definition: Password for POP3 account. To retrieve email messages sent to a specified email address, the TCP/IP

stack software must know the POP3 password that has been set for that email account.

Values: Alphanumeric ASCII text string up to 64 characters. No default.

Syntax: Set Value: AT#POP3PW=<value>

Get Value: AT#POP3PW? or AT#VPOP3, AT#VALL

#POP3SERV Set POP3 Address

Definition: To retrieve email messages, the TCP/IP stack software must know the address of the POP3 server that

is to be used. The POP3 server must be the one where the specified email account is hosted (which is

not necessarily maintained by the local ISP).

Values: 32-bit number in dotted-decimal notation (i.e., xxx.xxx.xxx.xxx) or

Alphanumeric ASCII text string up to 120 characters if DNS is available. No default.

Syntax: Set Value: AT#POP3SERV=<value>

Get Value: AT#POP3SERV? or AT#VPOP3, AT#VALL

#POP3UN Set POP3 User Name

Definition: User name for POP3 account. To retrieve email messages sent to a specified email address, the

TCP/IP stack software must know the POP3 user name that has been set for that email account.

Values: Alphanumeric ASCII text string up to 64 characters. No default.

Syntax: Set Value: AT#POP3UN=<value>

Get Value: AT#POP3UN? or AT#VPOP3, AT#VALL

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 77 78

Pas de commentaire

Multitech MTCBA-G-F2 Manuel d'utilisateur Page 19