Multitech MVP100GK Guide de l'utilisateur télécharger pdf (Page 19)

Chapter 2 - Gatekeeper Configuratrion

Multi-Tech Systems, Inc. MultiVOIP Gatekeeper User Guide 19

Set IP Parameters

From the Main Gatekeeper screen, click on Configuration|IP. In each field, enter the values that fit your

particular network.

1. Diff Serv Parameters group’s values pertain to a differential prioritizing system for IP packets as handled

by Diff Serv-compatible routers. The Call Control PHB (Per Hop Behavior) value prioritizes call setup IP

packets. The Voip Media PHB value prioritizes the RTP/RTCP audio IP packets. Before changing these

default values, consult with a qualified IP telecommunications engineer or refer to the TCP/IP standards

described in the Gatekeeper Software Chapter 5, Configuration IP Parameters section of this User Guide.

2. Enter the IP address of your network in the IP Address window.

3. Enter the IP Mask address for your network in the IP Mask window.

4. If a gateway device connects the Gatekeeper to the Internet, enter the gateway’s IP address in the

Gateway window.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 90 91

Pas de commentaire

Multitech MVP100GK Guide de l'utilisateur Page 19