Multitech RF825-E-AP Guide de l'utilisateur télécharger pdf (Page 29)

Chapter 4 – Configuring the RouteFinder

Multi-Tech Systems, Inc. RouteFinder RF825/RF825-AP User Guide (Document Number S000422B) 29

Configuring the RouteFinder Using the Wizard Setup

The Wizard Setup Screen

Using the Wizard Setup is a quick way to enter the basic configuration parameters to allow

communication between the LAN workstation(s) and the Internet.

Important Note: An initial configuration must be completed for each type of RouteFinder functions:

firewall configuration, LAN-to-LAN configuration, a LAN-to-Remote Client configuration.

Click the Wizard Setup button located under the Menu Bar. The following screen displays.

Screen Notes:

•

If you are using the AP build, a section labeled WLAN (inset shown on the right of the screen

shot) displays after you select Independent Subnet on the Network Setup > Wireless LAN

screen.

LAN Settings –

The following settings should be acceptable for your site:

IP Address – 192.168.2.1 defaults into this field.

Subnet Mask – 255.255.255.0 defaults into this field.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 103 104

Pas de commentaire

Multitech RF825-E-AP Guide de l'utilisateur Page 29