Multi-Tech Systems, Inc.
RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 39
14. The VPN Settings screen for entering specific VPN settings will display. The Connection Name
(Site-A) defaults into the first field. Select Enable UID (Unique Identifier String) and continue to
enter the following settings:
a) Select Enable UID.
b) Local IPSec Identifier – Enter an IP address that identifies the Local IPSec for this connection.
(Ex: 192.168.0.2)
c) Remote IPSec Identifier – Enter an IP address that identifies the Remote IPSec for this
connection. (Ex: 204.26.122.103)
d) Remote IP Network – Enter the Remote IP Network address (LAN) for Site B. (Ex:
192.168.2.0)
e) Remote IP Netmask – Enter the Remote IP Netmask address for Site B. (Ex: 255.255.255.0)
f) Remote Gateway IP – Enter the Remote Gateway IP address (WAN) for Site B. (Ex:
204.26.122.103). If Site B is using dynamic IP addressing, set this value to 0.0.0.0.
Commentaires sur ces manuels