Multitech RF560VPN Manuel d'utilisateur télécharger pdf (Page 37)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 37

If you select Setup IPSEC Settings, the following screen displays:

· In the Connection Name field, type a name that describes a connection you would like to make.

· Example:

Site A.

· Click the Add button, and the VPN Settings detail screen will display (see the next screen). Once

you have entered the settings, the

Connection Name displays on the lower half of the screen

(above).

· Click the checkbox if you want to Disable Internet Access (VPN Tunnel Only).

· You can then edit, delete, or enable/disable this connection by clicking the corresponding buttons.

· To enable this connection, check the Enable box.

Note: If you uncheck the Enable box, the connection will not be active, but the parameters will

remain on the screen for you to enable, edit, or delete as desired.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42

Pas de commentaire

Multitech RF560VPN Manuel d'utilisateur Page 37