Multitech RF560VPN Manuel d'utilisateur télécharger pdf (Page 14)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 14

14a. The VPN Settings screen for entering specific VPN settings will display. The screen pictured

below assumes IKE is selected as the Secure Association. The Connection Name (SiteAtoB)

defaults into the first field. Two configuration choices are available for the Secure Association: IKE

and Manual.

a) Select Disable UID and leave Local IPSec Identifier and Remote IPSec Identifier blank.

Do not check Enabled Keep Alive.

c) Do not check Enabled NetBIOS Broadcast.

Remote Site – Select LAN.

Remote IP Network – Enter the Remote IP Network address (LAN) for Site B.

(Ex: 192.168.10.0)

Remote IP Netmask – Enter the Remote IP Netmask address for Site B. (Ex:

255.255.255.0)

Remote Gateway IP – Enter the Remote Gateway IP address (WAN) for Site B.

(Ex: 204.26.122.3)

Network Interface – Select the Network Interface from the drop-down list box. (Ex: WAN

Ethernet)

Secure Association – Select IKE to set how inbound packets will be filtered. IKE is the

default. IKE primarily encompasses router key exchange and the negotiation of security

policy. Selecting IKE will display the following fields.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 41 42

Pas de commentaire

Multitech RF560VPN Manuel d'utilisateur Page 14