Multitech RF560VPN Manuel d'utilisateur télécharger pdf (Page 16)

Multi-Tech Systems, Inc.

RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 16

15. Once the VPN settings are entered, click on the Save button. The Connection Name will display on

the lower half of the screen and on the initial VPN Settings screen. You can enable/disable, edit, or

delete this connection by clicking the corresponding buttons. To enable this connection, check the

Enable box that appears to the left of the connection name.

Note: If you uncheck the Enable box, the parameters will remain in the table for you to

enable/disable, edit, or delete at any time.

16.

After you have finished entering the data and making any changes on the various screens, click the

Save and Restart button to save the settings and restart the device. After the device restarts, it will

function according to the saved settings.

17. During the save and restart process, system messages will let you know that you have successfully

configured the settings for the device and saved the settings. You will see a status bar across the

bottom of your browser showing the progress of the startup process. The RouteFinder home page will

be loaded automatically after restart is completed.

This completes the configuration of the RF550VPN/RF560VPN at Site A. Now configure the NAT

box and SSH Sentinel client at Site B.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 41 42

Pas de commentaire

Multitech RF560VPN Manuel d'utilisateur Page 16