Multi-Tech Systems, Inc.
RF550/560VPN Reference Guide – RF550/560VPN Using a NAT Box with IPSec Pass-Through 8
11. On the ISP Settings screen, select Static IP Settings and enter the following information.
a) IP Assigned by your ISP: This is the IP address of the WAN port on the RF550VPN/RF560VPN
at Site A.
(Ex: 204.26.122.103)
b) IP Subnet Mask: This is the IP address of the subnet mask for the WAN port on the
RF550VPN/RF560VPN.
(Ex: 255.255.255.0)
c) IP Gateway Address: This is the IP address of the WAN port on the RF550VPN/RF560VPN at
Site B.
(Ex: 204.26.122.3)
Click the Next button.
Note: For this scenario of connecting two RouteFinders back-to-back it is not necessary to enter any
information for the ISP Additional Settings or Modem Settings.
Commentaires sur ces manuels